Home › CBAM default values › CN 7207
CBAM default values for CN 7207: Semi-finished products of iron or non-alloy steel (slabs, billets, blooms)
These are the official EU default values (specific embedded emissions, tCO₂e per tonne of
product) for every CN code under heading 7207, by country of origin — 32 countries, as published in Implementing
Regulation (EU) 2025/2621 and corrected by Implementing Regulation (EU) 2026/1740 (retroactive to 1 January 2026).
Importers use them whenever verified installation data is not available.
- Sector: Iron & steel. Only direct emissions count (Annex II goods); indirect emissions are reported, not charged.
- Mark-up on default values: 10% in 2026, 20% in 2027, 30% from 2028 — added to the values below when you declare on defaults.
- Free allocation: for 2026 you surrender certificates for embedded emissions minus the CBAM benchmark × 97.5% (Art. 31, Reg (EU) 2023/956; Reg (EU) 2025/2620). The benchmark follows the production route shown in the table.
What 2026 costs on CN 72071111: worked examples
1,000 tonnes of CN 72071111 (Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous), on the official default value with the 10% mark-up, at the published certificate price of €82.32/tCO₂e. You surrender is the 2026 obligation after the free allocation adjustment; full exposure is the same shipment once free allocation has gone (2034).
| Origin | SEE used (t/t) | Embedded tCO₂e | You surrender for 2026 | Full exposure | |
|---|
| China | 3.486 | 3,486 | €177,482 | €286,959 | Check yours → |
| India | 4.697 | 4,697 | €277,180 | €386,657 | Check yours → |
| Türkiye | 2.541 | 2,541 | €99,698 | €209,175 | Check yours → |
| Vietnam | 2.585 | 2,585 | €103,320 | €212,797 | Check yours → |
Computed by our CBAM engine on 2026-10-26. Illustrative single-product estimates; no Article 9 claim.
Default values by CN code and country
Values in tCO₂e per tonne, before the mark-up. “Route” is the production route behind the
default, which decides the benchmark used for free allocation.
CN 72071111 — Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.47 | 2.47 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.14 | 0.14 | (E) |
| Bosnia and Herzegovina | 2.34 | 2.34 | (C) |
| Brazil | 1.61 | 1.61 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.169 | 3.169 | (C) |
| Colombia | 2.11 | 2.11 | (C) |
| India | 4.27 | 4.27 | (C) |
| Indonesia | 8.23 | 8.23 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.1 | 2.1 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.74 | 2.74 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.53 | 1.53 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.41 | 2.41 | (C) |
| South Africa | 4.03 | 4.03 | (C) |
| South Korea | 2.118 | 2.118 | (C) |
| Taiwan | 2.298 | 2.298 | (C) |
| Thailand | 1.92 | 1.92 | (E) |
| Türkiye | 2.31 | 2.31 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 2.31 | 2.31 | (C) |
| United States | 1.39 | 1.39 | (C) |
| Uzbekistan | 3.21 | 3.21 | (E) |
| Vietnam | 2.35 | 2.35 | (C) |
| All other countries and territories | 3.996 | 3.996 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.23 | (C) |
CN 72071114 — Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by con (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.47 | 2.47 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.14 | 0.14 | (E) |
| Bosnia and Herzegovina | 2.34 | 2.34 | (C) |
| Brazil | 1.61 | 1.61 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.169 | 3.169 | (C) |
| Colombia | 2.11 | 2.11 | (C) |
| India | 4.27 | 4.27 | (C) |
| Indonesia | 8.23 | 8.23 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.1 | 2.1 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.74 | 2.74 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.53 | 1.53 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.41 | 2.41 | (C) |
| South Africa | 4.03 | 4.03 | (C) |
| South Korea | 2.118 | 2.118 | (C) |
| Taiwan | 2.298 | 2.298 | (C) |
| Thailand | 1.92 | 1.92 | (E) |
| Türkiye | 2.31 | 2.31 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 2.31 | 2.31 | (C) |
| United States | 1.39 | 1.39 | (C) |
| Uzbekistan | 3.21 | 3.21 | (E) |
| Vietnam | 2.35 | 2.35 | (C) |
| All other countries and territories | 3.996 | 3.996 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.23 | (C) |
CN 72071116 — Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by cont (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.47 | 2.47 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.14 | 0.14 | (E) |
| Bosnia and Herzegovina | 2.34 | 2.34 | (C) |
| Brazil | 1.61 | 1.61 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.169 | 3.169 | (C) |
| Colombia | 2.11 | 2.11 | (C) |
| India | 4.27 | 4.27 | (C) |
| Indonesia | 8.23 | 8.23 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.1 | 2.1 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.74 | 2.74 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.53 | 1.53 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.41 | 2.41 | (C) |
| South Africa | 4.03 | 4.03 | (C) |
| South Korea | 2.118 | 2.118 | (C) |
| Taiwan | 2.298 | 2.298 | (C) |
| Thailand | 1.92 | 1.92 | (E) |
| Türkiye | 2.31 | 2.31 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 2.31 | 2.31 | (C) |
| United States | 1.39 | 1.39 | (C) |
| Uzbekistan | 3.21 | 3.21 | (E) |
| Vietnam | 2.35 | 2.35 | (C) |
| All other countries and territories | 3.996 | 3.996 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.23 | (C) |
CN 72071190 — Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.46 | 2.46 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.13 | 0.13 | (E) |
| Bosnia and Herzegovina | 2.29 | 2.29 | (C) |
| Brazil | 2.44 | 2.44 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.314 | 3.314 | (C) |
| Colombia | 2.1 | 2.1 | (C) |
| India | 4.32 | 4.32 | (C) |
| Indonesia | 8.21 | 8.21 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.31 | 2.31 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.67 | 2.67 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.51 | 1.51 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.4 | 2.4 | (C) |
| South Africa | 4.02 | 4.02 | (C) |
| South Korea | 2.31 | 2.31 | (C) |
| Taiwan | 2.474 | 2.474 | (C) |
| Thailand | 1.44 | 1.44 | (E) |
| Türkiye | 3.087 | 3.087 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 3.04 | 3.04 | (C) |
| United States | 1.33 | 1.33 | (C) |
| Uzbekistan | 3.15 | 3.15 | (E) |
| Vietnam | 2.33 | 2.33 | (C) |
| All other countries and territories | 4.053 | 4.053 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.21 | (C) |
CN 72071210 — Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtain (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.47 | 2.47 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.14 | 0.14 | (E) |
| Bosnia and Herzegovina | 2.34 | 2.34 | (C) |
| Brazil | 1.61 | 1.61 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.169 | 3.169 | (C) |
| Colombia | 2.11 | 2.11 | (C) |
| India | 4.27 | 4.27 | (C) |
| Indonesia | 8.23 | 8.23 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.1 | 2.1 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.74 | 2.74 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.53 | 1.53 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.41 | 2.41 | (C) |
| South Africa | 4.03 | 4.03 | (C) |
| South Korea | 2.118 | 2.118 | (C) |
| Taiwan | 2.298 | 2.298 | (C) |
| Thailand | 1.92 | 1.92 | (E) |
| Türkiye | 2.31 | 2.31 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 2.31 | 2.31 | (C) |
| United States | 1.39 | 1.39 | (C) |
| Uzbekistan | 3.21 | 3.21 | (E) |
| Vietnam | 2.35 | 2.35 | (C) |
| All other countries and territories | 3.996 | 3.996 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.23 | (C) |
CN 72071290 — Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.46 | 2.46 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.13 | 0.13 | (E) |
| Bosnia and Herzegovina | 2.29 | 2.29 | (C) |
| Brazil | 2.44 | 2.44 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.314 | 3.314 | (C) |
| Colombia | 2.1 | 2.1 | (C) |
| India | 4.32 | 4.32 | (C) |
| Indonesia | 8.21 | 8.21 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.31 | 2.31 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.67 | 2.67 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.51 | 1.51 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.4 | 2.4 | (C) |
| South Africa | 4.02 | 4.02 | (C) |
| South Korea | 2.31 | 2.31 | (C) |
| Taiwan | 2.474 | 2.474 | (C) |
| Thailand | 1.44 | 1.44 | (E) |
| Türkiye | 3.087 | 3.087 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 3.04 | 3.04 | (C) |
| United States | 1.33 | 1.33 | (C) |
| Uzbekistan | 3.15 | 3.15 | (E) |
| Vietnam | 2.33 | 2.33 | (C) |
| All other countries and territories | 4.053 | 4.053 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.21 | (C) |
CN 72071912 — Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.47 | 2.47 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.14 | 0.14 | (E) |
| Bosnia and Herzegovina | 2.34 | 2.34 | (C) |
| Brazil | 1.61 | 1.61 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.169 | 3.169 | (C) |
| Colombia | 2.11 | 2.11 | (C) |
| India | 4.27 | 4.27 | (C) |
| Indonesia | 8.23 | 8.23 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.1 | 2.1 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.74 | 2.74 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.53 | 1.53 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.41 | 2.41 | (C) |
| South Africa | 4.03 | 4.03 | (C) |
| South Korea | 2.118 | 2.118 | (C) |
| Taiwan | 2.298 | 2.298 | (C) |
| Thailand | 1.92 | 1.92 | (E) |
| Türkiye | 2.31 | 2.31 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 2.31 | 2.31 | (C) |
| United States | 1.39 | 1.39 | (C) |
| Uzbekistan | 3.21 | 3.21 | (E) |
| Vietnam | 2.35 | 2.35 | (C) |
| All other countries and territories | 3.996 | 3.996 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.23 | (C) |
CN 72071919 — Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.46 | 2.46 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.13 | 0.13 | (E) |
| Bosnia and Herzegovina | 2.29 | 2.29 | (C) |
| Brazil | 2.44 | 2.44 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.314 | 3.314 | (C) |
| Colombia | 2.1 | 2.1 | (C) |
| India | 4.32 | 4.32 | (C) |
| Indonesia | 8.21 | 8.21 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.31 | 2.31 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.67 | 2.67 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.51 | 1.51 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.4 | 2.4 | (C) |
| South Africa | 4.02 | 4.02 | (C) |
| South Korea | 2.31 | 2.31 | (C) |
| Taiwan | 2.474 | 2.474 | (C) |
| Thailand | 1.44 | 1.44 | (E) |
| Türkiye | 3.087 | 3.087 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 3.04 | 3.04 | (C) |
| United States | 1.33 | 1.33 | (C) |
| Uzbekistan | 3.15 | 3.15 | (E) |
| Vietnam | 2.33 | 2.33 | (C) |
| All other countries and territories | 4.053 | 4.053 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.21 | (C) |
CN 72071980 — Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.47 | 2.47 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.14 | 0.14 | (E) |
| Bosnia and Herzegovina | 2.34 | 2.34 | (C) |
| Brazil | 1.61 | 1.61 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.169 | 3.169 | (C) |
| Colombia | 2.11 | 2.11 | (C) |
| India | 4.27 | 4.27 | (C) |
| Indonesia | 8.23 | 8.23 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.1 | 2.1 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.74 | 2.74 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.53 | 1.53 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.41 | 2.41 | (C) |
| South Africa | 4.03 | 4.03 | (C) |
| South Korea | 2.118 | 2.118 | (C) |
| Taiwan | 2.298 | 2.298 | (C) |
| Thailand | 1.92 | 1.92 | (E) |
| Türkiye | 2.31 | 2.31 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 2.31 | 2.31 | (C) |
| United States | 1.39 | 1.39 | (C) |
| Uzbekistan | 3.21 | 3.21 | (E) |
| Vietnam | 2.35 | 2.35 | (C) |
| All other countries and territories | 3.996 | 3.996 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.23 | (C) |
CN 72072011 — Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.47 | 2.47 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.14 | 0.14 | (E) |
| Bosnia and Herzegovina | 2.34 | 2.34 | (C) |
| Brazil | 1.61 | 1.61 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.169 | 3.169 | (C) |
| Colombia | 2.11 | 2.11 | (C) |
| India | 4.27 | 4.27 | (C) |
| Indonesia | 8.23 | 8.23 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.1 | 2.1 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.74 | 2.74 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.53 | 1.53 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.41 | 2.41 | (C) |
| South Africa | 4.03 | 4.03 | (C) |
| South Korea | 2.118 | 2.118 | (C) |
| Taiwan | 2.298 | 2.298 | (C) |
| Thailand | 1.92 | 1.92 | (E) |
| Türkiye | 2.31 | 2.31 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 2.31 | 2.31 | (C) |
| United States | 1.39 | 1.39 | (C) |
| Uzbekistan | 3.21 | 3.21 | (E) |
| Vietnam | 2.35 | 2.35 | (C) |
| All other countries and territories | 3.996 | 3.996 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.23 | (C) |
CN 72072015 — Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by conti (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.47 | 2.47 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.14 | 0.14 | (E) |
| Bosnia and Herzegovina | 2.34 | 2.34 | (C) |
| Brazil | 1.61 | 1.61 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.169 | 3.169 | (C) |
| Colombia | 2.11 | 2.11 | (C) |
| India | 4.27 | 4.27 | (C) |
| Indonesia | 8.23 | 8.23 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.1 | 2.1 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.74 | 2.74 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.53 | 1.53 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.41 | 2.41 | (C) |
| South Africa | 4.03 | 4.03 | (C) |
| South Korea | 2.118 | 2.118 | (C) |
| Taiwan | 2.298 | 2.298 | (C) |
| Thailand | 1.92 | 1.92 | (E) |
| Türkiye | 2.31 | 2.31 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 2.31 | 2.31 | (C) |
| United States | 1.39 | 1.39 | (C) |
| Uzbekistan | 3.21 | 3.21 | (E) |
| Vietnam | 2.35 | 2.35 | (C) |
| All other countries and territories | 3.996 | 3.996 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.23 | (C) |
CN 72072017 — Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous castin (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.47 | 2.47 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.14 | 0.14 | (E) |
| Bosnia and Herzegovina | 2.34 | 2.34 | (C) |
| Brazil | 1.61 | 1.61 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.169 | 3.169 | (C) |
| Colombia | 2.11 | 2.11 | (C) |
| India | 4.27 | 4.27 | (C) |
| Indonesia | 8.23 | 8.23 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.1 | 2.1 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.74 | 2.74 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.53 | 1.53 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.41 | 2.41 | (C) |
| South Africa | 4.03 | 4.03 | (C) |
| South Korea | 2.118 | 2.118 | (C) |
| Taiwan | 2.298 | 2.298 | (C) |
| Thailand | 1.92 | 1.92 | (E) |
| Türkiye | 2.31 | 2.31 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 2.31 | 2.31 | (C) |
| United States | 1.39 | 1.39 | (C) |
| Uzbekistan | 3.21 | 3.21 | (E) |
| Vietnam | 2.35 | 2.35 | (C) |
| All other countries and territories | 3.996 | 3.996 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.23 | (C) |
CN 72072019 — Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.46 | 2.46 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.13 | 0.13 | (E) |
| Bosnia and Herzegovina | 2.29 | 2.29 | (C) |
| Brazil | 2.44 | 2.44 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.314 | 3.314 | (C) |
| Colombia | 2.1 | 2.1 | (C) |
| India | 4.32 | 4.32 | (C) |
| Indonesia | 8.21 | 8.21 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.31 | 2.31 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.67 | 2.67 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.51 | 1.51 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.4 | 2.4 | (C) |
| South Africa | 4.02 | 4.02 | (C) |
| South Korea | 2.31 | 2.31 | (C) |
| Taiwan | 2.474 | 2.474 | (C) |
| Thailand | 1.44 | 1.44 | (E) |
| Türkiye | 3.087 | 3.087 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 3.04 | 3.04 | (C) |
| United States | 1.33 | 1.33 | (C) |
| Uzbekistan | 3.15 | 3.15 | (E) |
| Vietnam | 2.33 | 2.33 | (C) |
| All other countries and territories | 4.053 | 4.053 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.21 | (C) |
CN 72072032 — Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtai (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.47 | 2.47 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.14 | 0.14 | (E) |
| Bosnia and Herzegovina | 2.34 | 2.34 | (C) |
| Brazil | 1.61 | 1.61 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.169 | 3.169 | (C) |
| Colombia | 2.11 | 2.11 | (C) |
| India | 4.27 | 4.27 | (C) |
| Indonesia | 8.23 | 8.23 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.1 | 2.1 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.74 | 2.74 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.53 | 1.53 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.41 | 2.41 | (C) |
| South Africa | 4.03 | 4.03 | (C) |
| South Korea | 2.118 | 2.118 | (C) |
| Taiwan | 2.298 | 2.298 | (C) |
| Thailand | 1.92 | 1.92 | (E) |
| Türkiye | 2.31 | 2.31 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 2.31 | 2.31 | (C) |
| United States | 1.39 | 1.39 | (C) |
| Uzbekistan | 3.21 | 3.21 | (E) |
| Vietnam | 2.35 | 2.35 | (C) |
| All other countries and territories | 3.996 | 3.996 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.23 | (C) |
CN 72072039 — Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.46 | 2.46 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.13 | 0.13 | (E) |
| Bosnia and Herzegovina | 2.29 | 2.29 | (C) |
| Brazil | 2.44 | 2.44 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.314 | 3.314 | (C) |
| Colombia | 2.1 | 2.1 | (C) |
| India | 4.32 | 4.32 | (C) |
| Indonesia | 8.21 | 8.21 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.31 | 2.31 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.67 | 2.67 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.51 | 1.51 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.4 | 2.4 | (C) |
| South Africa | 4.02 | 4.02 | (C) |
| South Korea | 2.31 | 2.31 | (C) |
| Taiwan | 2.474 | 2.474 | (C) |
| Thailand | 1.44 | 1.44 | (E) |
| Türkiye | 3.087 | 3.087 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 3.04 | 3.04 | (C) |
| United States | 1.33 | 1.33 | (C) |
| Uzbekistan | 3.15 | 3.15 | (E) |
| Vietnam | 2.33 | 2.33 | (C) |
| All other countries and territories | 4.053 | 4.053 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.21 | (C) |
CN 72072052 — Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.47 | 2.47 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.14 | 0.14 | (E) |
| Bosnia and Herzegovina | 2.34 | 2.34 | (C) |
| Brazil | 1.61 | 1.61 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.169 | 3.169 | (C) |
| Colombia | 2.11 | 2.11 | (C) |
| India | 4.27 | 4.27 | (C) |
| Indonesia | 8.23 | 8.23 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.1 | 2.1 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.74 | 2.74 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.53 | 1.53 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.41 | 2.41 | (C) |
| South Africa | 4.03 | 4.03 | (C) |
| South Korea | 2.118 | 2.118 | (C) |
| Taiwan | 2.298 | 2.298 | (C) |
| Thailand | 1.92 | 1.92 | (E) |
| Türkiye | 2.31 | 2.31 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 2.31 | 2.31 | (C) |
| United States | 1.39 | 1.39 | (C) |
| Uzbekistan | 3.21 | 3.21 | (E) |
| Vietnam | 2.35 | 2.35 | (C) |
| All other countries and territories | 3.996 | 3.996 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.23 | (C) |
CN 72072059 — Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.46 | 2.46 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.13 | 0.13 | (E) |
| Bosnia and Herzegovina | 2.29 | 2.29 | (C) |
| Brazil | 2.44 | 2.44 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.314 | 3.314 | (C) |
| Colombia | 2.1 | 2.1 | (C) |
| India | 4.32 | 4.32 | (C) |
| Indonesia | 8.21 | 8.21 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.31 | 2.31 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.67 | 2.67 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.51 | 1.51 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.4 | 2.4 | (C) |
| South Africa | 4.02 | 4.02 | (C) |
| South Korea | 2.31 | 2.31 | (C) |
| Taiwan | 2.474 | 2.474 | (C) |
| Thailand | 1.44 | 1.44 | (E) |
| Türkiye | 3.087 | 3.087 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 3.04 | 3.04 | (C) |
| United States | 1.33 | 1.33 | (C) |
| Uzbekistan | 3.15 | 3.15 | (E) |
| Vietnam | 2.33 | 2.33 | (C) |
| All other countries and territories | 4.053 | 4.053 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.21 | (C) |
CN 72072080 — Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) (32 countries)
| Country of origin | Direct | Default value | Route |
|---|
| Algeria | 3 | 3 | (C) |
| Argentina | 2.47 | 2.47 | (C) |
| Australia | 2.92 | 2.92 | (C) |
| Azerbaijan | 0.14 | 0.14 | (E) |
| Bosnia and Herzegovina | 2.34 | 2.34 | (C) |
| Brazil | 1.61 | 1.61 | (C) |
| Canada | 1.33 | 1.33 | (C) |
| Chile | 2.05 | 2.05 | (C) |
| China | 3.169 | 3.169 | (C) |
| Colombia | 2.11 | 2.11 | (C) |
| India | 4.27 | 4.27 | (C) |
| Indonesia | 8.23 | 8.23 | (C) |
| Iran | 1.94 | 1.94 | (C) |
| Japan | 2.1 | 2.1 | (C) |
| Kazakhstan | 5.18 | 5.18 | (C) |
| Mexico | 2.74 | 2.74 | (C) |
| Myanmar (Burma) | 0.47 | 0.47 | (E) |
| New Zealand | 2.41 | 2.41 | (C) |
| North Macedonia | 1.53 | 1.53 | (E) |
| Philippines | 0.74 | 0.74 | (E) |
| Russia | 3.21 | 3.21 | (C) |
| Serbia | 2.41 | 2.41 | (C) |
| South Africa | 4.03 | 4.03 | (C) |
| South Korea | 2.118 | 2.118 | (C) |
| Taiwan | 2.298 | 2.298 | (C) |
| Thailand | 1.92 | 1.92 | (E) |
| Türkiye | 2.31 | 2.31 | (C) |
| Ukraine | 2.397 | 2.397 | (C) |
| United Kingdom | 2.31 | 2.31 | (C) |
| United States | 1.39 | 1.39 | (C) |
| Uzbekistan | 3.21 | 3.21 | (E) |
| Vietnam | 2.35 | 2.35 | (C) |
| All other countries and territories | 3.996 | 3.996 | (C) |
| Unknown origin (Annex IV, highest value) | – | 8.23 | (C) |
Questions about CN 7207
What is the CBAM default value for CN 72071111 from China?
The official EU default value for CN 72071111 (Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous) from China is 3.169 tCO2e per tonne before the mark-up; with the 10.0% mark-up for 2026 it is 3.486 tCO2e per tonne. On 1,000 t that is about €177,482 of 2026 certificates to surrender at the published price (€82.32/t).
Which emissions count for CN 7207 under CBAM?
Only direct emissions count for iron & steel goods (Annex II of Regulation (EU) 2023/956): indirect emissions from electricity are reported but not charged.
How much mark-up is added to the CBAM default values for CN 7207?
The default value carries a regulatory mark-up of 10% in 2026, 20% in 2027 and 30% from 2028 (Implementing Regulation (EU) 2025/2621). Verified actual emissions from the installation replace the default and carry no mark-up.
How do I use actual emissions instead of the default value for CN 7207?
Ask the producing installation for its specific embedded emissions, calculated under the EU method and checked by an accredited CBAM verifier. Until then the default value for the country of origin applies.
Replace the default with verified data
Default values are a conservative fallback, not a measurement of any plant. Verified actual emissions from your
supplier's installation remove the mark-up and usually lower the bill. CBAM Compliance invites your suppliers in their
language, computes their figure with the official method, and produces registry-ready QReport XML.
See your full exposure or read how default values work.
Related headings: CN 2601 · CN 7201 · CN 7202 · CN 7203 · CN 7205 · CN 7206 · CN 7208 · CN 7209 · CN 7210 · CN 7211 · CN 7212 · CN 7213 · CN 7214 · CN 7215 · CN 7216 · CN 7217 · CN 7218 · CN 7219 · CN 7220 · CN 7221 · CN 7222 · CN 7223 · CN 7224 · CN 7225 · CN 7226 · CN 7227 · CN 7228 · CN 7229 · CN 7301 · CN 7302 · CN 7303 · CN 7304 · CN 7305 · CN 7306 · CN 7307 · CN 7308 · CN 7309 · CN 7310 · CN 7311 · CN 7318 · CN 7326
Source: European Commission, CBAM default values (Implementing Regulation (EU) 2025/2621 as corrected by
2026/1740), reproduced exactly from the official annex. Last rebuilt 2026-10-26. Not legal advice.
